Logo

Showing posts with label Fittonia. Show all posts
Showing posts with label Fittonia. Show all posts

Propagating Fittonia

(My work fittonia in Novemeber 2008 when it still looked beautiful.)

You may remember my Fittonia Propagation Project (see picture of healthy fittonia above, read the post here) regarding my desire to thin out my Fittonia argyroneura that was growing magnificently in my office. Well, unfortunately this plant threw a fit while I was gone during my long New Year's weekend. I had watered it on December 31st before leaving work and thought everything would be just fine. However, when I returned to work on January 5th the plant was "passed out" and was very unhappy. I promptly watered it and thought it would return to normal.

Troubled Fittonia
(My pitiful work fittonia in January 2009.)

The plant did bring itself back up into an upright position, but many of it's leaves shriveled up and needed to be removed. While this Fittonia now looks rather pitiful, as seen above, it is still alive. I am very happy that I decided to take cuttings from the mother plant when I did because I still have two healthy new plants from the two cuttings I took.

Hopefully this will not happen to any of my fittonia plants again.

Fittonia Propagation Project Update

Posted by Jordan | Tuesday, December 16, 2008 | , , | 1 comments »

Fittonia Cutting Growing WellI have not been able to post that much recently due to being busy at work, with Christmas shopping, and also due to the fact that Annah and I do not have internet at home, so I thought I would at least try to write up a quick post to keep this site going!

As of today, December 16th, my fittonia propagation project has been working well. I have continued to water the cuttings and mist them every four to five days. Both of the cuttings seem to be doing well and I will have to figure out one of these days how long I will keep them growing inside their humid ziploc bag. Perhaps a few more weeks will suffice, but I will probably have to do more research to determine whether or not it should be longer.


One of the cuttings has produced some aerial roots which are growing down toward the soil. I'm not sure if this is going to be problematic or not, but we shall see. I probably did not cut the cutting short enough or perhaps I did not place it far enough in the soil.

Anyway, that's the update on the fittonia cuttings for now. Look forward to a new post within the next couple of days!

Project: Fittonia Propagation

Posted by Jordan | Wednesday, November 26, 2008 | , , | 15 comments »

Propagating Fittonia While I was at work on November 12th, I decided that it was time to try propagating my pink Fittonia (Fittonia argyroneura) because it was starting to get a little out of control, so I gathered up all of the tools I needed and started with the project.

The tools I used were:

After doing some research, I found that one of the easiest methods for fittonia propagation is by using stem cuttings. I used the bonsai trimming shears to cut the fittonia stems, selecting stems with 4 to 5 leaves. I put some houseplant soil into the two plastic cups I had, placed the cut stems about an inch down into the soil, and then packed the soil around the base of the stem. I then watered the cuttings, placed them into a plastic ziploc bag, and then sprayed them with water. The last step in the process was to blow air into the bag to expand it so that the plants had room to grow. Once the air was blown into the bags they were closed and the bags were placed on the top of a storage cabinet, which is about a foot below the fluorescent lighting fixture.

Propagating FittoniaEvery couple of days I spray more water, blow air into the bag, and reseal it. So far this has been working well and the cuttings appear to be growing.

There will be a status update in the future to check on the progress of the cuttings.

(Office plants on the windowsill)

This is the second post regarding my office plants. This post will look at the plants which grow on the windowsill in my office.



(Ardisia japonica 'variegata')

Ardisia japonica 'variegata'

I had written about my Ardisia japonica 'variegata' plant in January of this year. Since that time it has grown quite a bit but it still remains in the same pot as it was in at that time and is probably due for a new pot. It receives both fluorescent light and light reflected off some of the metal siding of the office building where I work. It normally gets watered about once a week and has only once started to wilt due to lack of watering on time. In the previous post I had written about it I envisioned this plant being able to produce some berries or small fruit, which I had read about while researching the plant, but thus far it has not produced anything beyond new growth. It obviously does not have the appropriate conditions to produce such fruit. The most likely reason for the lack of fruit is inadequate sunlight. Regardless, it still adds a little variety to my office plants with the variegation on the leaves. I had previously recommended it as an office plant and this recommendation still holds true. Go out and buy one for yourself!



(Hedera helix "Ivy")

Hedera helix "Ivy"

This Ivy plant was purchased back in January and you may have seen a picture of it in another post I did recently regarding an anniversary present, but this plant is another plant that provides a nice variety of color with it's variegated leaves. This plant has been doing well since I purchased it. The one thing that the plant seems to dislike is the amount of light it receives since it wants to grow towards the light outside and this has resulted in all of the leaves facing toward the window. This is not really a problem or anything, since I still like the plant, but I might have changed the location of the plant if I had known that it would grow like that.



(Crassula ovata "Jade")

Crassula ovata "Jade"

This Jade plant was purchased at Wal-Mart, which is not really known for their plants, but it sometimes offers somewhat decent plants. The plant has been growing well for the past year, although the speed of growth has never been all that impressive. The plant does not receive any actual sunlight in my office, once again only receiving reflective light off the metal of the building, but it does receive about eight hours of sunlight per weekday. It gets watered about once every seven to ten days, and since it is a succulent this watering schedules seems to be adequate. The plant itself is about ready for a new pot, but like my other plants needing a larger pot, I just haven't had enough time to get around to moving them. Also, you may notice that the plant has googly eyes on it and for more information as to why this is the case, you can read about it in this post. This plant is great if your office receives enough light or will have an adequate amount of fluorescent lighting. For only a few dollars to buy one of these plants, go ahead and try to grow one of these in your office!



(Schlumbergera "Christmas Cactus")

Schlumbergera "Christmas Cactus"

My Schlumbergera or Christmas cactus (Thanksgiving Cactus, Holiday Cactus, whatever you want to call it...) has been doing fine in the office. I have had it in the office since last December. For a while this plant did not really do anything at all, but since May it has pushed out some new growth and looks relatively healthy. Hopefully I will be able to get this plant (or any of my other schlums) to bloom this year. This is also an easy plant that I would recommend for someone looking for a plant to have in their office.



(Ficus retusa "Ginseng Ficus")

Ficus retusa "Ginseng Ficus"

This is another plant that was written about previously. This Ficus retusa is still alive and has been doing rather well, although from looking at the picture of it in the previous post, which was taken back in January, I can tell that the leaves have thinned out a bit. This is likely due to slight changes in lighting or temperature which have occurred over the months. Additionally, there was one time for this plant where it may not have been correctly watered. Another change I made to this plant, on the great advice from readers, was to remove the rocks which had been glued on top of the soil. This has made it easier to tell when to water it and I think it has made the plant healthier. At the same time, however, I think it resulted in some temporary leaf loss, although the plant has since stabilized if it was indeed a result of moving the glued rock layer. This plant also, like the Jade plant, has two googly eyes on it. This is a nice plant, although it is sometimes fussy, so be aware of that if you want to buy one.



(Fittonia argyroneura 'Pink Vein')

Fittonia argyroneura 'Pink Vein'

My Fittonia argyroneura 'Pink Vein', which is just one of many of my fittonia's, is a plant that adds more color to my office. This plant is one of my favorite office plants and it has been very easy to take care of. It does very well with the fluorescent lighting in my office and it also enjoys getting the reflected light from outside. The most difficult aspect of taking care of this plant is being able to tell when it needs to be watered. If I do not water it exactly at the right time, the plant gets very fussy and will wilt, which basically makes the plant look like it has passed out. It is a beautiful plant and I recommend it if you are looking for a nice office plant.



(My Sansevieria trifasciata when it was blooming)

Sansevieria

One of the non-windowsill plants, which I forgot to include in the first part of the Office Plant posts, is my Sansevieria. The reason why I forgot to include it in the other post is because it is located at the other end of the building and I normally only see if when I go to water it. I had written a post in July about how the plant was blooming, and the plant has not done anything else since then. It is still alive and doing well. Sansevieria plants are great for the office because they do not require all that much light, so they are yet another recommended plant for your office.